🔧 EZ TRAC Axle Measurement Form

Complete all measurements to help us build your custom axle kit

📏 Get as close as possible: +/- 0.125"
✏️ Modifying existing submission for project Project number is locked. Edit any fields below and click Update Measurements to save changes.

Project Information

Left Hand (LH) Arm Measurements

Arm Measurements G, H, K
G - Axle Pad to Top of Steer
Axle Pad to top of steer
H - King Pin Center to Arm
King Pin Center to arm
K - Arm Thickness
Arm Thickness
Z - Arm Offset
Arm Offset
Arm Offset Z
L - Drag Link Pin Minor Diameter
Minor diameter of taper stud hole, measured at nut side. Drag link below = nut on top; drag link above = nut on bottom.
L minor diameter 0.94in reference
Tap to enlarge
LH Drag Link
Drag link above or below arm?
LH Steer Arm Only?
If checked, RH Drag Link will be set to N/A

Right Hand (RH) Arm Measurements

G - Axle Pad to Top of Steer
H - King Pin Center to Arm
K - Arm Thickness
Z - Arm Offset
L - Drag Link Pin Minor Diameter
Minor diameter of taper stud hole at nut side.
RH Drag Link
Drag link above or below arm?

Left Hand (LH) Suspension Measurements

Note: Some springs have jounce stop, some have spacers, some have shock mount on top, bottom, or none. If there is a taper shim or angle bracket, measure to the center and note shim is present.
Suspension Measurements T, L, S Spring Configuration Examples
T - Top Cap from Spring
Top cap from spring to ___
L - Leaf Springs Thickness
Leaf Springs Thickness
S - Spacer Thickness
Spacer Thickness or 0
X - Shock Mount Location
Top, Bottom, or None

Right Hand (RH) Suspension Measurements

T - Top Cap from Spring
L - Leaf Springs Thickness
S - Spacer Thickness
X - Shock Mount Location

Additional Information

📸 Upload photos of the measurements for reference
✅ Measurements submitted successfully! Our team will process your custom axle kit.
❌